Green claims you can prove.

Questions

Citable answers, dated sources.

The answers below bind the product. If one of them stops being true, the product changes, not the page.

What ClaimTrace does, and does not do

How do I check an environmental claim before publishing it?

Read its exact wording against the rules that apply on the day: the practices Directive (EU) 2024/825 adds to the EU blacklist, the rules on misleading practices of Directive 2005/29/EC, and the national texts of each market, and hold the evidence before you publish. ClaimTrace does that reading and cites the dated rule each claim matches; the decision stays yours. The method, with its sources: Checking environmental claims before publication.

Does ClaimTrace settle the legal question for my claim?

No, and that is deliberate. The product records a finding, cites the rule in its version and at its date, and logs it. It never settles the legal question for a claim: that call belongs to your counsel and, ultimately, to a court. What ClaimTrace gives you is the dated finding and the evidence attached to it, which is precisely what you will be asked to produce.

What does the status “to be qualified” mean?

This finding calls for the judgement of a consumer-law professional, your own. It states neither compliance nor non-compliance.

Which claims do you cover?

Three families: environmental claims, claims about a product's durability, and social claims, labels included. Out of scope, unless an environmental, durability or social benefit is claimed with them: composition, allergens and diets, health, price, delivery and origin alone. Today the rulebook carries the common European rules, for pages in French, German and English; each country's own rules come next.

How do you find the claims?

Through automated processing, framed by a sourced and versioned rulebook. Every claim is searched for word for word in the page, never rephrased, and the slightest doubt leads to an abstention, read by a person, rather than a status.

Do you read the text inside images?

No: the content of images is not read, and the report says so. Image labels, the page title and the description shown by search engines are read, and every claim states where it sits, so you know where to correct it.

Does your scan respect our websites?

Yes. It identifies itself as ClaimTrace, follows the instructions your sites give to robots, downloads only the text of pages, never their images, and the free scan covers only the domain of the requester's business email address.

What if ClaimTrace gets it wrong?

It will happen, and the service is built so that the error stays visible and correctable. Every finding cites the rule, its version and what triggered it: you can challenge it knowingly, and a person decides. A miscalibrated rule is fixed in a new version of the rulebook, never by editing the old one; the original finding stays as it was rendered, dated. And the engine never decides that no action is required: only a person decides that.

We already have a lawyer: what is ClaimTrace for?

So that your lawyer works on what matters. ClaimTrace finds every claim on your pages, cites the applicable rule in its dated version, records who decided what and re-reads your pages every month; it draws no conclusion on any company's situation. Your lawyer settles the hard cases; ClaimTrace handles the recurring volume and keeps the file you can produce, for a fraction of the cost of a manual review.

Plans, billing and getting started

What is a market?

A market is a country you sell to. The EU rules apply everywhere; national rules complete them, today for France and Germany. The free scan covers one market, Core two, Pro up to five, and Enterprise is agreed with you.

What counts as a monitored reference?

A monitored reference is one page (one canonical URL) tracked on one market: a product page, a service offer page, or a commitments, “about” or CSR page. Variants shown on the same page (sizes, colours, shades) count as one reference when they carry the same environmental claims, and as separate references when their claims differ: a paint whose shades carry different claims counts one reference per shade. The same product tracked on two markets counts as two references: 400 products on two markets make 800 references. Plan volumes, overage metering and the simulator all use this unit.

How often are my pages re-read?

Automatically every month in Core and Pro; Enterprise is agreed with you. A weekly re-reading is available as an option on Pro, at twice the fee: 30,000 € excl. tax a year instead of 15,000 €, with a PDF report that is weekly too; it is not open during the initial three-month term. You can also launch a re-scan on demand whenever you like, within your account’s monthly analysis budget (the reading of your pages by our agents), and nothing is billed on top silently.

What does the weekly option change?

A change on one of your pages is detected within 30 days with the monthly re-reading, and within 7 days with the weekly option, up to 23 days earlier. The option is available on Pro, outside the initial three-month term, at twice the fee, that is 30,000 € excl. tax a year instead of 15,000 €; in Enterprise, the frequency is agreed with you, with twice the fee as the starting point. With the weekly option, the PDF report is also sent every week, to all administrators, so that the service follows the frequency you chose.

Who is the weekly option for?

For catalogues that change fast: fashion and online retail, several teams publishing, frequent campaigns and seasonal launches. For them, a change detected up to 23 days earlier has a concrete value: a claim can be corrected before it has been online for a month. If your pages change rarely, the monthly re-reading is enough.

Can I register ClaimTrace as a supplier and have my purchase order number on the invoice?

Yes, on Pro: standard supplier registration and your purchase order number on the invoice are included. We complete your supplier forms from our public supplier file. Any additional request, such as bespoke procurement procedures or completing your own security questionnaires, requires an Enterprise account; the audit provided by the data processing agreement remains open to every customer.

What is the report?

A PDF report sent automatically to all the administrators of your account: quarterly in Core, monthly in Pro and Enterprise. It shows how your register evolved, which rules changed and which corrections remain. No review call is imposed: if you want to talk to us, write to us and we propose slots.

What happens if I go beyond 10,000 references on Pro?

Between 10,000 and 12,000 references, nothing is interrupted: each additional reference is counted at 0.15 € excl. tax a month (0.30 € with the weekly option), on the annual reconciliation invoice. Beyond 12,000, an Enterprise account is required: you can move to the Enterprise offer on simple written request, with no set-up fee, the difference in fee being invoiced pro rata for the remaining period; reduce your volume; or ask us to negotiate a specific contract; for sixty days nothing is interrupted: each reference beyond 12,000 is re-read and billed at 0.15 € excl. tax a month (0.30 € with the weekly option); without a choice after that, the references beyond 12,000 that you designate are neither re-read nor billed, and nothing is deleted.

How are references above my plan billed?

Metered monthly, always below the monthly unit price of the included references in your plan, at the launch price as at the reference price: 0.30, 0.20 or 0.15 euro per reference per month. For Pro, the rate is 0.15 euro per reference per month between 10,000 and 12,000 references (0.30 euro with the weekly option), then Enterprise. Overages across the year are accumulated into a single reconciliation invoice at renewal. If you stay within your volume, nothing is due and nothing carries over.

Is the service open?

In part: the free scan is open, and the rest of the service opens in stages, each announced here on the day it goes live. Larger companies can start with the Pro plan, guided and open for three months before any commitment.

Can I try before committing?

Yes, in three ways: the free scan examines five of your addresses; the Pro plan can start with an initial three-month term; and the audit delivers a dated diagnostic without a subscription. And, on request after your free scan, subject to qualification, a thirty-day pilot takes your ten addresses through Decision and Register: write to us, every request is qualified.

What is the pilot, and who can request it?

Thirty days on ten addresses, the five of your free scan plus five more, with Decision and Register, and a re-verification on day thirty; 1,000 € excl. tax for the thirty days, paid before the start unless the purchase order grants a payment period, on your public pages only, reviewed with you in two sessions. It is requested after the scan, and every request is qualified on criteria published on the pricing page: a domain of your own, a scan that found something to handle, a person who decides, a catalogue or distribution at the scale of the first plan, a sector within the rulebook's scope, neither competitor nor agency. On day thirty, you subscribe and the pilot becomes day zero of your register, or the register stops being kept. The amount of the pilot is deducted from your first subscription invoice if you accept a quote or sign a purchase order within thirty days after the end of the pilot.

Who uses ClaimTrace on the client side?

Most often, the marketing or e-commerce team that publishes, and the person in charge of compliance or legal who signs off. One workspace per organisation, several members, and dated exports for your counsel. Everyone sees the same findings, dated and cited: the service is there to agree on facts, not to referee between departments.

Which companies is ClaimTrace for?

Brands, retail chains and retailers selling to consumers in the Union whose pages carry environmental claims: direct-to-consumer brands from a few hundred to 2,000 references with Core, multi-brand and multi-country groups up to 10,000 references with Pro, retailers and private labels beyond that with Enterprise. The most exposed sectors: cosmetics and personal care, fashion and textiles, food, home and cleaning, sport and outdoor. Details are on the Who it is for page.

Can an agency use ClaimTrace for its client brands?

Yes, with the Agency offer: 15,000 € excl. tax a year for the agency, with 5 agency users and a one-hour remote training session, plus 150 € excl. tax per client brand and per month. Each brand is re-read every month by default; the weekly re-reading is an option taken brand by brand, at twice the price of that brand, 300 € excl. tax a month, and the agency fee does not double. A client brand holds up to 2,000 monitored references, on the markets named when it is added among the 27 of the Union; the addition that would pass 2,000 is refused at that exact ceiling, without deleting or interrupting anything, and the brand moves to an Enterprise contract, which the agency concludes on written request. Today, rewording is the guidance drawn from the cited rule; the drafted proposed sentence, on your request, will also open for each client brand, within its monthly analysis budget. The API is not promised. The Agencies page sets out the whole offer.

Who works in a client brand's space, the agency or the brand?

The 5 agency users reach every client brand of the agency, one space at a time, never two clients at once, and never take a seat of a client brand. When the agency chooses that a brand has direct access to its space, up to 3 users of the brand itself work there; otherwise the agency operates the space alone.

Do a client brand's reports carry the agency's name?

Yes. In the brand's space and on its PDF reports: the agency's name and accent colour, the report footer in the agency's name and the sender name of the emails. The mention “powered by ClaimTrace” and the version of the ruleset stay on every report: the chain of proof is never white-labelled. The agency's logo will come in a later version; a custom domain is not offered.

Who answers to whom between ClaimTrace, an agency and its brands?

The agency warrants that it holds the agreement of each client brand. ClaimTrace answers only to the agency: the client brands are not parties to the contract and hold no contractual claim against ClaimTrace, and the agency answers to its brands for the service it provides them. When a brand's space is opened, ClaimTrace sends it an email at the address the agency gives: it names the agency, says the space was opened at the agency's request, what the space keeps, that the brand may become a direct customer with its whole registry, and how to reach ClaimTrace.

How is the Agency offer billed?

ClaimTrace invoices the agency alone, never a client brand, on a signed purchase order, as for Pro; there is no online subscription and no card payment. The annual fee is invoiced in advance and paid by bank transfer within thirty days of the invoice date. The brand fees are invoiced monthly in arrears, on the number of client brands whose space was open at any time during the month: each counts for the whole month, a brand on the weekly re-reading at twice the price. A client brand is added either by the agency's owner from the agency's space, the brand's name typed twice and then a confirmation screen that says the month in course will be invoiced and counts as the order, or on the agency's written request. It is removed on the agency's written request. For invoicing, the removal takes effect on the day the request is received, or on the later day it asks for, even if ClaimTrace carries it out later: the month of that day is due, not the next. From the day ClaimTrace carries the removal out, the agency no longer has access to the space, which becomes read-only until its deletion; the agency obtains its full export from ClaimTrace on written request.

What happens to a client brand's space when it leaves its agency?

The brand may continue as a direct customer of ClaimTrace, if it asks before its space becomes read-only. Its space becomes its own, with its whole registry, never a restart from zero, on its own subscription: a direct plan, on its own purchase order. The agency then loses access to it. Without a transfer, the space follows the end of contract of the terms: export, then deletion.

What does doing nothing cost?

In France, a company faces a criminal fine of up to 1.5 million euros for a misleading commercial practice, which can be raised to 10 % of its average annual turnover, or to 80 % of the advertising spend when the practice rests on environmental claims (Consumer Code, article L. 132-2, and Penal Code, article 131-38). In Germany, up to 4 % of turnover in the member states concerned for a widespread infringement, plus injunctions brought by competitors and associations (UWG, § 19). These are legal caps, not a risk estimate. For comparison, Core 500 costs 2,400 € excl. tax a year at the launch price, reserved for the first twenty Core customers, the equivalent of 40 hours of manual review at 60 € an hour. These are not theoretical risks: in July 2025, Shein accepted a 40 million euro fine in France, partly over its environmental claims, and paid 1 million euros in Italy.

Does ClaimTrace cover services, not only products?

Yes. Directive 2005/29/EC, as amended by Directive (EU) 2024/825, defines a product as any good or service: a “carbon neutral” delivery, “green” electricity, a “responsible” flight or a “decarbonised” subscription fall under the same rules as a product page. Two decisions illustrate it: on 20 March 2024 the District Court of Amsterdam held fifteen of the nineteen KLM claims examined misleading; on 23 October 2025 the Paris Judicial Court found misleading commercial practices against TotalEnergies. For a service, a monitored reference is one offer page tracked on one market. Financial products are also subject to their own rules. The KLM judgment: what it established.

Why start now?

Because the directive has applied since 27 September 2026 in the Member States that have transposed it, France has yet to transpose it, and an inspection looks at what is published that day, not at your intentions. And because a register is worth its history: the date on which you knew, and what you corrected, cannot be rebuilt afterwards.

The problem is not marginal: according to a European Commission study, 53.3% of the environmental claims examined were vague, misleading or unfounded, and 40% had no evidence at all. Read our analysis.

Our product copy is written by automated tools: what does that change?

The pace. A product page is now written in seconds, faster than any team can review it, and a banned claim can repeat across hundreds of pages before anyone sees it. ClaimTrace keeps up: it re-reads the published pages, flags what a rule change affects and keeps a record of the corrections. What counts before an inspector is not the tool that wrote the sentence, but the proof that someone checked it.

How does billing work?

Yearly, excluding tax. Plans are ordered on a signed purchase order; the invoice, issued in advance by Andromède SAS, is paid by bank transfer within thirty days. Pro can start with an initial three-month term. The price is kept for the term of the commitment, and new capabilities are included at no extra cost.

We have hundreds of thousands of references. Is that possible?

Yes, under the Enterprise offer, on quotation. References are monitored in batches, at an agreed pace, and catalogue import by file feeds the register without re-entry; the API will open in stages, each announced on the pricing page. What matters for the price is not the number of pages read on one day, but the number of references tracked over time.

How long before the first report?

For the free scan: a finding by email within 90 minutes for five addresses. For a plan: as soon as onboarding is done, the time to declare your references and markets; the first report follows the first full walk, and the register starts on that date. Nothing to install on your side.

The company, the markets and what comes next

Who is behind ClaimTrace?

The service is published by Andromède SAS, a French company registered in Paris, trading as ClaimTrace; the legal notice gives the publisher's full identity, including the publication director. The About page sets out our mission, our founder's background and our method.

Which languages do you work in?

Today, in French, English and German: these are the languages in which the Detector is measured. The other EU languages will open one by one, each measured before it is announced. Rewriting guidance, however, is only given in languages whose quality conditions are met, and every report states, language by language, whether it is only read or read and written. We prefer an explicit abstention to a risky suggestion. As for our own exchanges (demos, training, emails and support), we work in French and English.

Which markets do you cover?

The European Union, with the rulebook drawn from Directive (EU) 2024/825 and the texts it amends, completed by the first national rules, French and German, which take precedence on a page intended for their market. Pages are read in French, English and German. Other markets and languages will come through rulebook versions, announced on the roadmap.

We sell in Germany: what changes?

The pace of the risk. In Germany, advertising law is enforced mostly by competitors and associations: a formal warning letter (Abmahnung) arrives without any prior inspection, with a deadline of a few days and a demand for a cease-and-desist undertaking with a penalty for each repeat. Deutsche Umwelthilfe alone brought 92 proceedings against “climate neutral” claims between May 2022 and September 2024. Having the file ready before the letter changes the conversation: Core covers two markets, France and Germany for instance, within the same fee.

What comes next?

The public roadmap says it, block by block: what is already built, dated; what arrives at opening; what follows in the coming months; what comes within eighteen months. It comes with written commitments: every capability added to your plan is opened to you at no extra cost, the price is kept for the term of the commitment, and no date is promised there that we would not keep.

Why not build this ourselves?

You can, and three things will be missing. Separation: a register kept outside your own systems is worth more, before an inspector or a buyer, than a file you keep yourself. Upkeep: a rulebook is maintained rule by rule, text by text, country by country, at every change, and it must be reviewed. History: what was not recorded on the date no longer exists. Add the full cost, code, legal monitoring, legal reviews, maintenance, hosting and security audits, rarely less than one full-time position a year: the subscription costs a fraction of that, and it starts today.

Technical and legal questions, for due diligence

The scope of claims

“Made in France”, “vegan”, “100% cotton”: does ClaimTrace analyse them?

No, unless they promise a benefit for the environment. A product's origin, diet or composition are not environmental claims: other rules govern them, on origin, consumer information or textile fibre labelling, and ClaimTrace does not judge them. “Vegan, so better for the planet”, on the other hand, is one, and the engine treats it as such.

What is the difference between a generic and a specific claim?

A generic claim stays vague: “eco-friendly”, “environmentally friendly”, “green”, without saying which aspect it covers. Directive (EU) 2024/825 has banned it since 27 September 2026, unless recognised excellent environmental performance can be shown; in France, until the transposition act is passed, it can be sanctioned as a misleading commercial practice, case by case. A specific claim names what it states, a material, an absent substance, a figure: it is not banned for all that, but it must be substantiated. ClaimTrace tells them apart, and never applies the ban on the first to the second.

Is a “Made in France” badge a label?

Not in the sense of the directive. A sustainability label sets a product apart by its environmental or social characteristics; an origin badge says where the product is made. Only the former are banned when they rest neither on a certification scheme nor on a public authority. ClaimTrace does not confuse the two.

“20% less wear”: is that a banned durability claim?

No. The directive bans falsely claiming that a product lasts a certain time or withstands a certain intensity of use. A measured figure is a comparison: it is not banned, it must be substantiated, with the reference and method of the measurement. ClaimTrace classes it as “to be evidenced”.

Does ClaimTrace analyse what a company says about itself, not only about its products?

Yes, on your web pages. Directive (EU) 2024/825 covers claims about a product, a brand or a trader. ClaimTrace also finds those about the brand or the company (“an eco-friendly company”, “our head office is carbon neutral”) and cites the rule: a generic claim (Annex I, point 4a), a claim about the whole business when the evidence covers only part of it (point 4b), neutrality based on offsetting (point 4c). For the free scan, put the address of your commitments or “about” page among the five. A finding does not yet say whether the claim is about a product or about the company: your team says so when it attaches the evidence.

Are our commitments for 2030 or 2040 covered?

Yes. A claim about future environmental performance, such as “net zero by 2040”, falls under Article 6(2)(d) of Directive 2005/29/EC as amended: it must rest on clear and verifiable commitments, a detailed and realistic implementation plan, and regular checks by an independent expert. ClaimTrace classes it as “to be evidenced”. In the register, the correction lead says what to publish: the plan, its milestones, the independent third party that verifies them and the conclusions of its verification. “Net zero by 2030”: what a future claim has to show.

Are the sustainability report (CSRD) or the company name analysed?

Not today. Your commitments, “about” and CSR web pages are read, like a product page. ClaimTrace reads web pages, not PDF documents; it does not analyse a sustainability report, whose mandatory information is not a claim within the meaning of the directive. Nor does it read a brand, company or product name as a claim, although the directive counts them among its forms: a “Green…” brand is reviewed with your legal adviser.

The rulebook and the regulation

What does Directive (EU) 2024/825 change?

It prohibits generic environmental claims that are not substantiated, regulates the use of private sustainability labels, and requires substantiation to be available at the moment the claim is made. Its rules apply from 27 September 2026 in the Member States that have transposed it: 21 had done so on 13 November 2026. The Commission sent letters of formal notice to twenty Member States, France among them, on 28 May 2026; the French bill adopted by the Senate on 18 February 2026 awaits the National Assembly.

What if a rule changes after I have published?

The Watcher flags the affected claims and the product creates a fresh finding, dated under the new version of the rulebook. The earlier finding stays intact and available: your position at the time of publication remains demonstrable, which is exactly the point of a chained register.

How do you keep up with regulatory change?

The rulebook is versioned rule by rule: each rule cites its official text, its date and the decisions that inform it. When a text, a guideline or a ruling changes, a new version is published, dated, with what changed; your existing findings keep the version they cited, and a new scan requalifies them. Monitoring without versions would be an opinion; here, it is a version.

The report, the register and the proof

Does the register carry weight with an inspector?

Every finding is dated, chained to the previous one, and cites the rule in the version in force that day; once the provider, now being selected, is in service, it will also be sealed by a qualified time stamp: you can show what you knew and what you could prove on a given date. ClaimTrace guarantees neither the completeness of its findings nor the outcome of an inspection; responsibility for what you publish remains yours.

Does ClaimTrace replace a verification body?

No. A verification or certification body examines your evidence and takes on its own responsibility; ClaimTrace issues no certificate and no label. ClaimTrace keeps the register of your claims, links each one to its evidence and to the applicable rules, and keeps a dated history of your decisions. When a verification body, an enforcement authority or a competitor sending you a formal notice asks you to substantiate a claim, the evidence file is already assembled, dated and ready to hand over, instead of being rebuilt in a rush.

What does a scan report contain?

For each page: the claims found, where they sit on the page, with their family; for each one, the rule cited in its version, what triggers it, and the status among the four; the pages a site refused or the service could not read, with the cause named; and the findings a person must review. All dated, with the hashes of the captured pages, as a dated PDF.

What is the register for day to day, beyond an inspection?

For proving what you published, when, what was found and what you corrected, without relying on a team's memory. It serves during an acquisition, when the buyer inherits the claims in circulation; with an insurer or a retailer asking for guarantees; and for steering: how many claims to be evidenced remain open, since when, on which markets.

Data, security and reversibility

Is my data used for anything other than my service?

No. Your data is used only to provide the service: it is hosted in the European Union and is reused for no other purpose, neither by us nor by our providers; a provider that does not commit to this is not selected. The text of the pages sent for analysis is processed by our page analysis subprocessor, named in the list of subprocessors, possibly outside the Union under standard contractual clauses; that subprocessor processes it under its commercial terms, which exclude the training of its systems on this content. What we send it, the text of the pages and nothing else, is a product invariant.

Where is the data hosted?

In the European Union, with the production database in Frankfurt and application functions in the same zone. The service is containerisable and uses no proprietary primitive without a substitute, so that migration to a sovereign European host remains possible. The subprocessors involved are listed in the data processing agreement, which you can sign in its standard version with any plan.

What happens if I leave?

You export your register at any time, in dated CSV and PDF. On termination the exports remain available for thirty days, after which data is deleted. The export stays accessible even during suspension for non-payment.

Can you install ClaimTrace on our own servers?

No, and it is a matter of proof as much as technology. The register's value lies in being kept outside your own systems, dated and chained, then sealed by qualified time-stamping (the provider is being selected): evidence stored on the servers of the party who must produce it carries far less weight with an inspector. The service also evolves continuously, its rulebook, rules and checks; an installation on your premises would freeze precisely what must stay current. If your security policy requires it, however, a dedicated instance, hosted in the European Union, reserved for your organisation and operated by us, can be provided under an Enterprise contract, on quotation.

What happens to our data if ClaimTrace stops?

Your full exports, dated CSV and PDF, are available at any time, without waiting: that is the first protection, and it does not depend on us. At the end of the contract, exports remain accessible for thirty days, then data is deleted, except for the daily global digests of the hash chain; the export includes the proofs and, once qualified time-stamping is in service, the time-stamp tokens, so it stays verifiable without ClaimTrace. A written continuity plan and a code escrow for Enterprise are planned; we will announce them when they are in place.

Can you complete our security questionnaire?

The standard security questionnaire and the continuity and reversibility plan are given to every customer who signs the data processing agreement; completing a large customer's own security questionnaire falls under the Enterprise offer. For everyone, the security page describes what is built, where the data lives and what is erased on request; the current list of subprocessors, with their locations, is published on the Subprocessors page. ClaimTrace holds no ISO certification and no SOC report today; a security certification is planned, and will be announced on the day it is obtained.

Stay informedOne email at each new stage of the service, never more than one a month.

You will confirm by a link sent by email, and can unsubscribe in one click. The form is loaded from Brevo, our email provider, only when you click.